Contact Information: Contacts: Nancy B. Green The William Baldwin Group +1 650.856.6192 Email Contact Mike Gehl Intrinsity +1 970.949.6480 Email Contact
Intrinsity Nets 2 GHz, 4000 DMIPS PowerPC FastCore
AMCC Titan PowerPC FastCore Consumes Under 2.5W at 2 GHz
| Quelle: Intrinsity
SANTA CLARA, CA -- (MARKET WIRE) -- May 21, 2007 -- Microprocessor Forum -- Intrinsity
announced today that it has applied its Fast14® Technology and processor
architectural design expertise to deliver its first FastCore™ PowerPC®
core with an unprecedented combination of performance, power and area.
Developed for AMCC, the Titan FastCore embedded core offers greater than
4000 DMIPS at 2 GHz, and consumes under 2.5 Watts at 2 GHz. Comparable
cores provide significantly lower performance at more than twice the power
consumption of Titan.
Will Strauss of Forward Concepts said, "Intrinsity has shown its mettle
with the Titan core. No other 32-bit PowerPC core even comes close to the
2.0 GHz 4000-plus DMIPS performance of this core. Fast14 technology really
is fast."
Intrinsity's CEO, Bob Russo, explained, "Ordinary static synthesized, or
even firm, implementations of similar PowerPC cores struggle to attain 600
MHz. Using Fast14 logic, our designers got over three times more speed from
Titan -- over 2 GHz -- using the same 90 nm process technology. Titan's
4000-plus DMIPS at under 2.5 Watts power dissipation is unprecedented, as
is the very small area envelope.
"Titan defines the power of our Fast14 technology and the excellence of our
design team -- performance characteristics comparable to a full-custom
implementation with a fraction of the resources, and at a faction of the
cost," Russo concluded.
The Titan FastCore is the first in series of ultra-high performance
processor cores that Intrinsity is developing by applying its Fast14
Technology to industry-standard processor architectures. The Titan FastCore
is an ISA FastCore based on the PowerPC instruction set architecture, and
is designed to maximize the speed, power and area advantages provided by
Fast14 technology. ISA FastCores deliver multicore-level performance using
a single core -- typically 3x or greater than that of conventional static
implementations.
IMS' Embedded Processing Analyst Tom Hackenberg said, "As the return on
investment of shrinking design processes diminishes, SoC solutions
providers are under pressure to find alternative ways to increase
microprocessor performance, reduce power dissipation or reduce area;
Intrinsity's design of Titan seems an innovative response to all these
issues."
Intrinsity is also developing, RTL FastCores, based on register transfer
level representations of popular embedded IP cores. RTL FastCores are
cycle-accurate, exact replacements of standard cores. Using the same CMOS
process, RTL FastCores typically have twice the performance of conventional
synthesized static implementations, while maintaining similar MHz/mW
characteristics. The cycle accuracy of RTL FastCores allows them to employ
the same software and test infrastructure used with original embedded
processor built with conventional static logic.
Targeted at high-speed networking and control plane applications, the Titan
FastCore is based on the Book-E Enhanced PowerPC Architecture with a 64-bit
IEEE floating point unit (FPU) and features a dual symmetric dispatch,
superscalar, pipelined processing unit, along with memory management, cache
control, timers and debug facilities often required by embedded products.
Separate level zero and one instruction and data caches are provided. The
L1 caches use the MESI protocol and are snooped to maintain memory
coherency in multicore applications. The processor connects to local
on-chip peripherals through a memory-coherent, high performance bus.
Intrinsity also developed Titan's high-speed memories, leveraging the
performance of Fast14 to sustain the high circuit speeds required.
Fast14 Domino Logic Increases Speed and Reduces Area
Intrinsity's Fast14 1-of-N domino logic (NDL) increases the Titan core's
clock speed by a) employing faster dynamic logic, b) using a smaller number
of more complex gates, c) reducing the overall transistor count and d)
performing logic work exclusively with smaller, faster n-channel (NMOS)
devices. The omission of the p-channel devices in the logic path reduces
both the circuit size and its parasitic capacitance. In addition, Fast14
logic signals are represented in a 1-of-N encoding style, rather than
binary, reducing signal encode and decode requirements and further
minimizing both the size and power consumption of the circuit.
Because the logic evaluation direction is through the NMOS network,
("n-stack") to ground, individual transistors can automatically be sized to
speed up the evaluation operation. This also allows designers to create
more complex functions in a single gate than is possible using conventional
CMOS static logic design styles, reducing the number of stages needed to
implement a logic function.
Multi-phase overlapping clocking ensures low risk, manufacturable dynamic
logic
Historically, the use of dynamic logic has been limited because it requires
overly precise manipulation of the clock delays to prevent timing problems.
Signal delay variability due to load and parasitics has also been a common
problem with traditional dynamic logic styles.
The Fast14 technology used in the Titan FastCore solves the timing issue by
using multiphase overlapping clocks with a nominal 50% duty cycle that
eliminates the need for synchronizing latches or registers at the cycle
boundaries. Critical paths such as arithmetic units, control logic or SRAM
interfaces can cross system clock cycle boundaries as needed without
incurring the penalty of a register delay. The Titan core has very few
registers or latches in the timing critical logic paths, thereby conserving
time and silicon area. The multiphase clocks in Titan increase the
circuit's tolerance for moderate amounts of clock uncertainty due to duty
cycle error, clock-period jitter, or clock skew, and allow time borrowing
between gates. Hold time problems and race conditions are virtually
eliminated, also enabling painless integration of dynamic and static logic
elements in the Fast14 design environment.
Low noise and low power
Traditional dynamic logic does not provide an inversion function, so both
true and complement values of a bit must be generated and transmitted,
resulting in a logic style referred to as dual-rail dynamic logic. One of
the wires representing a bit must switch every cycle, whether the data
changes or not, leading to reduced power efficiency and increased circuit
noise. In contrast, Fast14 as used in Titan employs 1-of-N signal encoding,
where the radix N can typically be between one and eight. 1-of-N signal
encoding uses a single signal net to represent a bit, effectively reducing
the switching factor by 1/2 or more. Lower switching factors, combined
with the inherent shielding provided by surrounding quiescent signals,
results in both lower power consumption and less noise. Increased wiring
complexity is mitigated by a bundle routing, and noise coupling is further
reduced by altering signal ordering upon layer changes and automatic
opportunistic shielding.
1-of-N signal encoding, when applied to the inputs of an NDL gate, results
in a high fraction of the NMOS transistors being in the off state.
Consequently, when the network evaluates, less electrical charge is
discharged to ground, improving gate speed, power, and area efficiency.
Automated Design Methodology
Intrinsity's proprietary Fast14 Design Automation Platform was used to
address Fast14 NDL-specific features in Titan, while industry-standard
tools were used wherever possible for tasks such as formal verification,
timing analysis and scan pattern generation. This flow provides an
efficient, reliable, repeatable methodology that results in highly
efficient and manufacturable designs.
About Intrinsity
Intrinsity, Inc. is a design technology company that provides the designs,
tools, technologies, and expertise so its customers can efficiently and
predictably produce high performance, low-power and cost-effective
products. Intrinsity's proprietary Fast14 technology is used to create
FastCore embedded cores, which provide not only circuit speeds of up to and
beyond 3 GHz, but also the means to trade-off speed, power and area to
achieve the optimal solution to customer design targets. Fast14 technology
includes a combination of process specific libraries, a specification
language and a set of tools that help automate the design flow.
Intrinsity's corporate headquarters are located in Austin, Texas. For
further information regarding Intrinsity, please visit our web site at
http://www.intrinsity.com.