Joint pressrelease by Autoliv and Infineon Technologies -- Autoliv Selects Infineon Automotive Power Semiconductors for Innovative Seatbelt Pretension Systems

Joint pressrelease by Autoliv and Infineon Technologies -- Autoliv Selects
Infineon Automotive Power Semiconductors for Innovative Seatbelt Pretension
Systems 

(Stockholm, Sweden and Neubiberg, Germany - October 28, 2008) - Autoliv Inc.
(NYSE: ALV and SSE: ALIVsdb) and Infineon Technologies AG (FSE/NYSE: IFX) today
announced that Autoliv has selected Infineon as sole supplier of power
semiconductors for its next-generation seatbelt pretension systems, called
Active Seatbelts. 

The Infineon power chip, capable of controlling an electrical motor with a
relatively high current for a very short period of time, is a member of the
NovalithIC™ family recently launched in volume quantities. Autoliv, the world's
largest automotive safety system supplier, uses an electrical motor and
electronics to improve occupant safety by starting to tighten the seatbelt a few
milliseconds before an imminent crash. Infineon's chip has a crucial role in
controlling and powering the electrical motor. Autoliv is ramping up production
of these active seatbelt systems which are currently used in premium cars. 

Innovative Active Seatbelts for added safety and comfort in cars
Autoliv's Active Seatbelts use a small motor device containing the Infineon
NovalithIC power chip, which enables additional safety and comfort features in
cars. For instance, if a collision is anticipated, an occupant's seatbelt will
be automatically tightened to remove any existing belt slack before a collision,
thereby reducing the risk for rib fractures and other injuries. Autoliv's
innovative seatbelt pretension system has the capability to adapt the restraint
force to the severity of the crash and weight of the occupant. The seatbelt
pretensioners also facilitate buckling up and improve comfort by softly
tightening the seatbelt when buckling up. Finally, unlike regular pyrotechnic
seatbelt pretensioners, Active Seatbelts can be tightened to minimize the
G-forces when driving through curves.

“The combination of our many years of experience in innovative safety systems
and Infineon's expertise in semiconductors has resulted in this new approach for
Active Seatbelt pretension systems,” said Steve Rode, President of Autoliv
Electronics. 
“We selected Infineon, which has been a supplier to us for many years, because
of 
Infineon's continuous focus on high quality level automotive solutions.” 

“Automotive safety electronics is a key area for Infineon. Our automotive chips
support the European Union's goals to cut the number of traffic accidents in
half by 2010. It is Infineon's objective to provide more intelligent automotive
chips to help make cars safer, more convenient and more energy efficient,” said
Claus Geisler, Senior Vice President and General Manager at the Automotive
division of Infineon Technologies. “Our NovalithICs combine our core
competencies in automotive power chip technologies with the latest advanced
assembly technologies using chip-on-chip and chip-by-chip schemes.”  

Up to 70 small motors in a car using power chips
On average, a mid-range car today contains about 40 to 50 small motors used to
change the position of various features in the car including a driver's wheel,
seats, window-lifts and sun roof. In the premium car segment, there are about 70
motors 
per car. According to the May 2008 report of the market research company
Strategy Analytics, Infineon is the world's second largest and Europe's largest
provider of automotive semiconductors with a global market share of 9.4 percent
of the total USD 19.3 billion automotive semiconductor market in the 2007
calendar year. Autoliv accounts for more than a third of the global seatbelt
market. Last year, the company sold more than 110 million seatbelt systems.
Almost half of them had regular non-reversible pyrotechnic pretensioners that
tighten the belt at the onset of a crash.  

Technical information on NovalithICTM
The NovalithICTM combines three integrated circuits - two power chips and one
logic circuit to control and monitor the power stage - in one small package of
approximately 1 square centimeter in size, using the latest chip-by-chip as well
as chip-on-chip technologies. The NovalithICTM family provides a fully
integrated high current half-bridge for motor drive applications. The devices
cut by half the space needed on a printed circuit board for power electronics
driving motor applications with industry leading currents of up to 70 Ampere
(A). Power output varies continuously depending on application need - a feature
that slashes energy consumption by as much as 80 percent. As the on-state
resistance is typically just 16 mOhm and the quiescent current just 7 µA the
device is very energy efficient. Available in lead-free (green) packages,
NovalithICTM s serve a broad range of applications, from smaller motors such as
fuel pumps and windshield wiper drives in automobiles to more power-hungry
equipment such as drills, air-conditioning systems and engine cooling fans. 
The NovalithICTMs in Autoliv's Active Seatbelts are lead-free.

Further information on Infineon's automotive power semiconductors and NovalithIC
chips is available at www.infineon.com/automotivepower and
www.infineon.com/novalithic
Further information on Autoliv's Active Seatbelts systems is available at
www.autoliv.com/whatwedo/seatbelts/activeseatbelts

Inquiries: 
Jan Olsson, Vice President Research, Autoliv Inc., 		Phone +46-322-626260
Henrik Kaar, Director Communications, Autoliv Inc., 		Phone: +46-8-587 20 614
Monika Sonntag, Media Relations, Infineon Technologies, 	Phone +49-89-234 24497	


This news release is available online at www.autoliv.com and at
www.infineon.com/press/


Autoliv Inc., the worldwide leader in automotive safety systems, develops and
manufactures automotive safety systems for all major automotive manufacturers in
the world. Together with its joint ventures, Autoliv has more than 80 facilities
with approximately 43,000 employees in 32 vehicle-producing countries. In
addition, the Company has technical centers in 12 countries around the world,
including 21 test tracks, more than any other automotive safety supplier. Sales
in 2007 amounted to US $6.8 billion. The Company's shares are listed on the New
York Stock Exchange (NYSE: ALV) and its Swedish Depository Receipts on the
Stockholm Stock Exchange (SSE: ALIV). 

Infineon Technologies AG, Neubiberg, Germany, offers semiconductor and system
solutions addressing three central challenges to modern society: energy
efficiency, communications, and security. In the 2007 fiscal year (ending
September), the company reported sales of Euro 7.7 billion (including Qimonda
sales of Euro 3.6 billion) with approximately 43,000 employees worldwide
(including approximately 13,500 Qimonda employees). With a global presence,
Infineon operates through its subsidiaries in the U.S. from Milpitas, CA, in the
Asia-Pacific region from Singapore, and in Japan from Tokyo. Infineon is listed
on the Frankfurt Stock Exchange and on the New York Stock Exchange (ticker
symbol: IFX).
Further information is available at www.infineon.com. 


Safe Harbour Statement
Statements in this presentation that are not statements of historical facts may
be forward-looking statements, within the meaning of the Private Securities
Litigation Reform Act. These statements involve risks and uncertainties,
including - but not limited to - the economic outlook for the Company's markets,
fluctuation of foreign currencies, fluctuation in vehicle production schedules
for which the Company is a supplier, continued uncertainty in program awards and
performance, the financial results of companies in which Autoliv has made
technology investments, pricing negotiations with customers, fluctuating fuel
and commodity prices and other costs, supply issues, product liability, warranty
and recall claims, dependence on customers and suppliers, and other factors
discussed in Autoliv's filings with the Securities and Exchange Commission
(SEC). We do not intend or assume any obligation to update any of these
statements.