dynaCERT Offers a Solution to 2019 European CO2 Regulations

TORONTO, Sept. 24, 2018 (GLOBE NEWSWIRE) -- dynaCERT Inc. (TSX VENTURE: DYA) (OTCQB: DYFSF) (FRA: DMJ) ("dynaCERT" or the "Company") is pleased to provide an update on the TUV and homologation testing presented at the IAA Trade Show in Hanover Germany which is held from September 19-27, 2018.

European CO2 Regulations

The European regulations VECTO for CO2 reduction come into effect on January 1, 2019 (http://data.europa.eu/eli/reg/2017/2400/oj). This regulation will require all truck manufacturers to provide full emission testing on every new vehicle model in various load and road configurations.  These tests then become the baseline from which each vehicle sold in Europe built after January 1, 2025 must achieve a 15% reduction in CO2.  A further 5% reduction requirement is to be achieved by 2030.  Vehicles that do not achieve these CO2 reductions will lose their regulatory approvals.

As shown in the press release dated September 17, 2018, TUV tests were conducted under the requirement for Homologation to obtain an Allgemeinebetriebserlaubnis (ABE), the German Transport regulatory license that is required for any equipment used on on-road vehicles in Europe.  dynaCERT first contacted TUV 15 months ago. As the HydraGEN™ is the First-to-Market on-demand hydrogen delivery system, there was no protocol at that time, TUV had to develop a brand new testing protocol for the HydraGEN™ Technology evaluation for Homologation.  At such time, the Senior Engineer of TUV-SUD stated, “There does not exist equipment such as the HydraGEN™ Technology in the European market. dynaCERT’s HG1 is a Revolutionary Product coming into the European market at a time where this technology is urgently needed to help achieve current Paris Accord commitments and the very strict future European CO2 requirements.” 

The Head of Emissions Testing and Validation released the Test Data Results to management participating at the IAA. He stated emphatically, “We understandably struggled to justify how and why the HydraGEN™ unit performs as this is simply new to our marketplace. This is a real and effective product.” While the dynamometer test showed a 8.9% fuel savings, separately, during the on-road break-in period after the baseline test, the on-board diagnostic (OBD) record of the 2018 MAN TGX 18-460 long haul truck with an HG1-45B showed a 20.1% average fuel savings for the 188 hours of tests, travelling through the mountainous terrain of southern Germany in a heavy load commercial operation.

The current status of the Homologation ABE application is that all required testing has been completed and the HydraGEN™ technology has passed all test points. Final reporting of the results has been submitted to TUV-NORD which will compile an overview report and submit such report to the Government Transport Ministry (Kraftfahrtbundesamt KBA) for final review prior to ABE certification.  Once the ABE is issued, dynaCERT GmbH will be authorized to sell HydraGEN™ units for use on vehicles across Europe.

Robert Maier COO & Chief Engineer, states: “The successful German test results add credence for our HydraGEN™ Technology.  The positive response at the IAA increases our confidence in the viability and future demand for our product.  The strict European regulations that are coming into place for CO2 reductions will drive the necessity for a innovative solution for which our HydraGEN™ Technology will play a predominant role.”

About dynaCERT Inc.
dynaCERT Inc. manufactures, distributes, and installs Carbon Emission Reduction Technology for use with internal combustion engines.  As part of the growing global hydrogen economy, our patent-pending technology creates hydrogen and oxygen on-demand through electrolysis and supplies these through the air intake to enhance combustion, resulting in lower carbon emissions and greater fuel efficiency.  Our technology is designed for use with all types and sizes of diesel engines used in on-road vehicles, reefer trailers, off-road construction, power generation, mining and forestry equipment, marine vessels and railroad locomotives.   Website:  www.dynaCERT.com

Except for statements of historical fact, this news release contains certain "forward-looking information" within the meaning of applicable securities law. Forward-looking information is frequently characterized by words such as "plan", "expect", "project", "intend", "believe", "anticipate", "estimate" and other similar words, or statements that certain events or conditions "may" or "will" occur.  In particular, forward-looking information in this press release includes, but is not limited to the potential expansion into new markets, industries and segments, such as diesel-powered use of any the dynaCERT products and sales.  Although we believe that the expectations reflected in the forward-looking information are reasonable, there can be no assurance that such expectations will prove to be correct. We cannot guarantee future results, performance or achievements. Consequently, there is no representation that the actual results achieved will be the same, in whole or in part, as those set out in the forward-looking information.

Forward-looking information is based on the opinions and estimates of management at the date the statements are made, and are subject to a variety of risks and uncertainties and other factors that could cause actual events or results to differ materially from those anticipated in the forward-looking information.  Some of the risks and other factors that could cause the results to differ materially from those expressed in the forward-looking information include, but are not limited to: uncertainty as to whether our strategies and business plans will yield the expected benefits; availability and cost of capital; the ability to identify and develop and achieve commercial success for new products and technologies; the level of expenditures necessary to maintain and improve the quality of products and services; changes in technology and changes in laws and regulations; the uncertainty of the emerging hydrogen economy; including the hydrogen economy moving at a pace not anticipated; our ability to secure and maintain strategic relationships and distribution agreements; and the other risk factors disclosed under our profile on SEDAR at www.sedar.com.  Readers are cautioned that this list of risk factors should not be construed as exhaustive. 

The forward-looking information contained in this news release is expressly qualified by this cautionary statement. We undertake no duty to update any of the forward-looking information to conform such information to actual results or to changes in our expectations except as otherwise required by applicable securities legislation.  Readers are cautioned not to place undue reliance on forward-looking information.

Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of the release.

On Behalf of the Board

Murray James Payne, CEO
For more information, please contact:

Jim Payne, CEO & President
dynaCERT Inc.
#101 – 501 Alliance Avenue
Toronto, Ontario M6N 2J1
(416) 766-9691 x 2

Investor Relations
dynaCERT Inc.
Nancy Massicotte
(416) 766-9691 x 1