VANCOUVER, British Columbia, Aug. 30, 2018 (GLOBE NEWSWIRE) -- Brixton Metals Corporation (TSXV: BBB) (the “Company” or “Brixton”) is pleased to announce the discovery of a kimberlitic body at its Langis project. The Company sent a total of 53.6 kg collected from the three holes that intersected the kimberlitic rock to SRC Geoanalytical Laboratories Diamond Services (GLDS) in Saskatoon for micro diamonds recovery tests. Micro diamonds recovery tests returned one diamond from the kimberlite intersected in drill hole LM-18-37.
Results of micro diamond recovery tests by caustic fusion:
| Sample | Sample Weight | Fraction Size | Diamond | Length | Width | Height | Weight | Weight |
| ID | Dry kg | Microns | Count | (mm) | (mm) | (mm) | (mg) | (ct) |
| E 2/2 | 6.45 | 150 | 1 | 0.28 | 0.2 | 0.08 | 0.0112 | 0.000056 |
| Diamond Descriptions |
| Off White, Transparent, No Inclusions, Fragment, Serrate Laminae |
Figure 1: Image of the diamond recovered from drill hole LM-18-37 (sample E 2/2)
http://www.globenewswire.com/NewsRoom/AttachmentNg/9fbbca96-cc8e-479e-a4aa-feaf843c938e
Chairman and CEO of Brixton, Gary R. Thompson stated, “We are very intrigued by this discovery. We were targeting cobalt-nickel-silver mineralization in the shallow Archean rocks when we encountered the kimberlitic material. The fact that we recovered a diamond fragment given that the kimberlite sample size was very small is an exciting discovery. The kimberlite in hole 36 to hole 37 is 149m apart and the distance of the kimberlite from hole 37 to the kimberlite in hole 34 is 515m. This has piqued our interest as to whether a very large kimberlite pipe or a series of pipes exists.”
Three holes encountered kimberlitic breccia directly beneath the overburden (22m to 40m vertical depth). Please see figure 2.
Generally the kimberlitic rock is heavily weathered and brecciated. Additional work to determine the heavy minerals content and petrography is ongoing.
The first kimberlite unit was discovered in drill hole LM-18-34. Hole 34 was drilled at 130 degrees azimuth with a dip of 38 degrees. Overburden was encountered to 65m drill depth of approximately 40m vertical depth. The kimberlite in hole 34 is a 15m interval from 65m drill depth. The kimberlite is very weathered including limestone rich fragments.
Drill hole LM-18-36 is located 495m to the northeast from hole 34. Drill hole LM-18-36 was drilled at 120 degrees azimuth and a 38 degrees dip. Overburden was encountered to 36.5m or about 22m vertical depth. The syenite clast rich kimberlite was encountered over a 14m interval from 36.5m.
Hole LM-18-37 was located 149m northwest from drill hole 36 and 515m from hole 34. Hole 37 was drilled at 351.5 degrees azimuth and a 38 degrees dip. Overburden was encountered to 57m or about 35m vertical depth. The kimberlite interval in hole 37 was 44m in length from 60m. The kimberlite unit contained limestone fragments and is very weathered.
The Company is planning further core and RC drilling to test for the extent of the kimberlitic body. The company will consult with some of the top diamond exploration experts to assist with the evaluation and assessment of this new discovery.
Vice President of Exploration for Brixton, Sorin Posescu stated, “This is definitely an interesting time for Brixton and for the Langis project. We are excited to have discovered diamond bearing kimberlitic rocks and look forward to doing additional work to understand the full extent and the economic potential of this discovery. The Langis project is very well located with excellent infrastructure, year-round road and rail access, power, and low-cost drilling, which ultimately translates to a low cost of exploration.”
Figure 2: Drilling Plan Map and Magnetic Geophysics Map.
http://brixtonmetals.com/wp/wp-content/uploads/2018/08/Figure-2web-30-08-2018.jpg
Photos of the Langis Kimberlite
Core Photograph: LM-18-37 from 96.17 to 96.37m
http://brixtonmetals.com/wp/wp-content/uploads/2018/08/LM-18-37-96.17-96.37mweb.jpg
Core Photograph: LM-18-37 from 96.38m to 96.55m
http://brixtonmetals.com/wp/wp-content/uploads/2018/08/LM-18-37-96.38-96.55mweb.jpg
Core Photograph: LM18-37 from 96.00m to 96.15m
http://brixtonmetals.com/wp/wp-content/uploads/2018/08/LM-18-37-96-96.15mweb.jpg
Please see link to additional core photographs:
http://brixtonmetals.com/portfolios/langis-core-photos-2018/
Quality Assurance & Quality Control
Sealed samples were shipped by the Company geologists to SRC Geoanalytical Laboratories Diamond Services (GLDS) in Saskatoon for processing and caustic fusion analysis. SRC Geoanalytical Laboratories Diamond Services are ISO/IEC 17025:2005 Accredited Laboratory for laboratory procedures. The GLDS are a SCC Accredited Laboratory (Standard Council of Canada). The kimberlite samples were analyzed for micro diamond recovery by Caustic Fusion at >106 microns.
About the Langis and Hudson Bay Silver-Cobalt Project
Brixton’s wholly owned Langis and Hudson Bay past producing mines are located 500km north from Toronto, Ontario, Canada. The cobalt-silver mineralization occurs as steeply-moderately and in some cases shallow dipping veins and as disseminations within any of the three main rock types: Archean volcanics, Coleman Member sediments and Nipissing diabase. The Langis mine produced 10.4Moz of silver at 25 oz/t Ag and 358,340 pounds of cobalt and the Hudson Bay mine produced 6.4Moz of silver at 123 oz/t Ag and 185,570 pounds of cobalt. Historically, the Cobalt Camp produced 50M pounds of cobalt as a by-product of 500M ounces of silver production.
Mr. Sorin Posescu, P.Geo., VP Exploration, is a Qualified Person as defined under National Instrument 43-101 standards and has reviewed and approved this news release.
About Brixton Metals Corporation
Brixton is a Canadian exploration and development company focused on the advancement of its gold and silver projects toward feasibility. Brixton wholly owns four exploration projects, the Thorn gold-silver and the Atlin gold projects located in NWBC, the Langis-Hudson Bay silver-cobalt project in Ontario and the Hog Heaven silver-gold-copper project in NW Montana, USA. The Company is actively seeking JV partners to advance one or more of its projects. Brixton Metals Corporation shares trade on the TSX-V under the ticker symbol BBB. For more information about Brixton please visit our website at www.brixtonmetals.com.
On Behalf of the Board of Directors
Mr. Gary R. Thompson, Chairman and CEO
Tel: 604-630-9707 or email: info@brixtonmetals.com
For Investor Relations please contact Mitchell Smith at mitchell.smith@brixtonmetals.com or 604-630-9707
Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
Information set forth in this news release may involve forward-looking statements under applicable securities laws. Forward-looking statements are statements that relate to future, not past, events. In this context, forward-looking statements often address expected future business and financial performance, and often contain words such as “anticipate”, “believe”, “plan”, “estimate”, “expect”, and “intend”, statements that an action or event “may”, “might”, “could”, “should”, or “will” be taken or occur, including statements that address potential quantity and/or grade of minerals, potential size and expansion of a mineralized zone, proposed timing of exploration and development plans, or other similar expressions. All statements, other than statements of historical fact included herein including, without limitation, statements regarding the use of proceeds, TSXV final approval, and the exploration potential of the Hog Heaven project based on historical drill results and forward looking statements. By their nature, forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements, or other future events, to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. Such factors include, among others, the following risks: the need for additional financing; operational risks associated with mineral exploration; fluctuations in commodity prices; title matters; and the additional risks identified in the annual information form of the Company or other reports and filings with the TSXV and applicable Canadian securities regulators. Forward-looking statements are made based on management’s beliefs, estimates and opinions on the date that statements are made and the Company undertakes no obligation to update forward-looking statements if these beliefs, estimates and opinions or other circumstances should change, except as required by applicable securities laws. Investors are cautioned against attributing undue certainty to forward-looking statements.